Home > DVD > Copy DVD > Copy Scratched DVD

Posted by Donna Peng - Contact Authoremail icon

Copy Severely Scratched DVD on Windows (10) with the Best DVD Copy Software

Are you a movie aficionado with tons of DVDs filling the shelves? Are you a paranoid parent with a naughty kid who always sneaks into your room and messes up your DVD discs? If yes, you may have some treasured DVD movies scratched or corrupted in other ways which cannot be played anymore. You may be reluctant to throw them away but still cannot do anything about it. Is there really nothing you can do to repair a scratched DVD? The answer is no! You can learn how to easily copy severely scratched DVD to DVD on Windows (10) to keep your movie treasures safe!

Strapped for time? Click one of the links below to jump straight to your most interested part.

Part 1: To Repair a Scratched DVD is Possible!

In fact, many programs can't rip damaged discs and therefore, you may have tried lots of DVD copy software before the best one appears into your sight. Things get easier here. Below we give you a brief introduction to a DVD copy program that is powerful enough to backup badly scratched, dirty, worn and minor cracked DVDs on Windows - WinX DVD Copy Pro.

WinX DVD Copy Pro is one of the best DVD copy software based on Windows (Windows 98, NT, 2000, 2003, XP, Vista, Windows 7/8/10 [32 & 64 bit]). To repair a scratched DVD would never be a problem for it. Some may know that bad sectors occur wherever a DVD is scratched or cracked. WinX DVD Copy Pro provides a stunning feature that allows skipping bad sectors during the copy processing, which is exactly how it works to copy severely scratched DVD on Windows. That is to say, the software is capable of automatically neglecting bad sectors on a disc whenever it comes across one. It also allows you to customize the least skipped sector quantity based on the actual condition of a corrupted DVD. If slightly scratched merely, you may adjust it to fewer sectors in order to loss as less information as possible and you may not notice the loss when you playback the movie. If it is badly corrupted like cracked, you may have the software to skip more sectors when it meets bad ones so as to ensure the completeness of the copy processing. WinX DVD Copy Pro could be such a life saver for some of you who have corrupted your favorite DVD badly by accident.

To Repair a Scratched DVD is a Few Clicks Away!

Equipping with such a wonderful feature does not make the program hard to handle at all. WinX DVD Copy Pro comes with an intuitive interface and facilitates the navigation to a great extent. You can see how easy it could be to copy severely scratched DVD!

Please download and install WinX DVD Copy Pro on your PC. Then, follow the steps to copy scratched DVD.

Part 2: To Repair a Scratched DVD is a Few Clicks Away!

Step 1: Launch WinX DVD Copy Pro, please click on Clone DVD to DVD button.

Easiest way to repair a scratched DVD

Step 2: Choose the source DVD and target DVD Burner

  1. If you have one DVD drive only, you will find the both source DVD and target DVD burner are not selectable. Just choose the sole option from the list menu.
  2. If you have multiple DVD drives, choose correct source DVD and target DVD burner from the list menu.

Step 3: Choose the temporary folder with enough vacant space (usually larger than 9 GB free space is required), to save the temporary ISO file copied from source scratched DVD for later burning to DVD.

Step 4: If the source DVD is copy-protected, please check copy protection removal options to make sure that DVD will be copied correctly without being interrupted by encryptions on your DVD.

Step 5: You are allowed to do advance settings at this step, such as how many sectors read per time, how many sectors are skipped when it encounters bad ones, etc. You may adjust the parameters according to how badly corrupted of your DVD.

Step 6: Click on RUN button to start the course.

Step 7: If you have one DVD drive only, you will be asked to take out the disc and insert a blank one When the DVD movie has been completely copied to the Temp Folder; if you have multiple drives, the program will be automatically begin to burn the movie to the blank disc after it is completely copied to the Temp Folder.

Till now, you have finished copying a scratched DVD.

Bonus Features: DVD to ISO Image & ISO Mounter

WinX DVD Copy Pro not only allows you easily copy any scratched DVD to bland discs to safely store the DVD content on Windows, but also allows you to clone scratched DVD to DVD, DVD to ISO Image, DVD to Video_TS Folder quickly and faultlessly. Besides, it is an ISO mounter and DVD burner as well. WinX DVD Copy Pro works fantastically fast when making a DVD backup copy on Windows and enables you to have a completely 1:1 ratio copy with fantastic qualities.

With this blazing fire shortcut on your Windows desktop, you will never have the hassles to look for a competent new program to copy severely scratched DVD anymore. Thanks to the frequent updates, WinX DVD Copy Pro can be your constant company whenever you want to repair badly corrupted DVD. It won't let you down!

Digiarty Software does not advocate copying copy-protected DVDs for any commercial purpose and suggests referring to the DVD copyright laws in your countries before doing so. Still have trouble about copying a scratched DVD? Please feel free to Email Us >>

ABOUT THE AUTHOR

author - Donna Peng

Donna Peng twitter icon

Donna Peng's fascination with multimedia began at an early age - shortly after she licked the physical disc and then she's been obsessed ever since. Her decade-long career at Digiarty after the graduation has seen her unmatched expertise in the field of DVD, digital video, software and anything related to home theatre. She is currently fascinated with photography.

Home > DVD > Copy DVD > Copy Scratched DVD